Updated November 2026

House plant diseases with names and pictures are the fastest way to figure out what is wrong with a sick houseplant. This guide walks you through the most common indoor plant diseases, the symptoms that set each one apart, and the practical steps that stop them from spreading. Because photos alone can be misleading under indoor light, each entry also describes what you should see up close and in the surrounding plant.

Why Visual Identification Matters for Indoor Plants

Indoor plants live in a narrow set of conditions. Humidity is often low, airflow is weak, and pots hold moisture longer than soil in the ground. Those conditions favor some pathogens and stress the plant in ways that make it easier for others to take hold. Many houseplant problems that look like disease are actually watering, light or nutrient issues, so the first job is to separate true pathogens from cultural problems.

Shopping for one? See our guide: Yellow Cucumber Plant Diseases With Pictures and Treatment: 5 Books Compared.

Diseases in houseplants usually fall into three groups: fungal, bacterial and viral. Fungal diseases are by far the most common indoors. Bacterial problems tend to show up as water-soaked spots and soft, foul-smelling tissue. Viral diseases are rarer and often appear as mottled or streaked leaves that do not respond to any treatment. A quick sort into one of these groups narrows your options considerably.

Common House Plant Diseases and What They Look Like

1. Powdery Mildew

Powdery mildew is one of the easiest diseases to recognize. It appears as white to gray, flour-like patches on the upper surface of leaves, and sometimes on stems. African violets, begonias, and many succulents are frequent targets. In early stages the spots are small and scattered. Left alone, they merge and can cause leaves to yellow and drop. Powdery mildew thrives when air is still and humidity swings between wet and dry, so improving airflow is often as important as treatment.

2. Root Rot (Pythium and Phytophthora)

Root rot is not visible at first, which makes it dangerous. The above-soil signs are wilting even when the soil is wet, yellowing lower leaves, slow growth, and a general droop. When you pull the plant from its pot, healthy roots are firm and pale, while rotted roots are brown or black, mushy, and sometimes have a sour smell. Pythium and Phytophthora are the water molds behind most cases. Overwatering is the usual trigger. The overwatered yucca is a classic example, and the Overwatered Yucca Plant Diseases Pictures: How to Spot Rot Early article shows what early damage looks like at the base of the plant.

3. Leaf Spot (Cercospora and Other Fungal Spots)

Leaf spot appears as round or irregular spots, often with a darker border and a tan or gray center. Spots may be dark brown, black, yellow, or reddish depending on the plant and the pathogen. Fungal leaf spots usually start on older leaves and move upward. Spots that run together can kill large areas of leaf tissue. Wet foliage that stays wet overnight is the main driver, so avoid misting and water at the soil line.

4. Botrytis Blight (Gray Mold)

Botrytis shows up as fuzzy gray or brown mold on flowers, buds, and soft tissue. It is common on flowering houseplants such as African violets, cyclamen, and geraniums, especially when humidity is high and airflow is poor. Dead flowers that stay attached to the plant are a frequent starting point. Remove them promptly, and move the plant to a spot with better air movement.

5. Anthracnose

Anthracnose causes sunken, dark lesions on leaves and stems, sometimes with a pinkish or orange spore mass in wet weather. Leaf edges and tips often brown first. Dracaena, philodendron, and some palms are reported to be affected. Anthracnose spreads by splashing water, so keep foliage dry and sanitize pruning tools between cuts.

6. Bacterial Leaf Spot and Bacterial Blight

Bacterial problems look water-soaked at first, then turn dark brown or black, often with a yellow halo. Unlike fungal spots, bacterial lesions may ooze or have a slimy texture and do not respond to fungicides. Affected leaves usually need to be removed, and the plant may need to be isolated. Dieffenbachia and peace lily are frequently reported with bacterial problems, especially when plants stay wet and crowded.

7. Viral Mosaic and Ring Spots

Viral diseases cause mottling, streaking, yellow rings, or distorted new growth. Colors may look patchy or mosaic-like. There is no cure for a virus in an infected plant. Discard heavily affected plants, and check other plants that share the same pots or tools, since many viruses are carried by sap-feeding insects such as aphids, thrips, and whiteflies.

How to Diagnose a Sick Houseplant Step by Step

Use this sequence before you buy any product. It prevents most misdiagnoses.

  1. Check the soil first. Push a finger two inches down. Wet soil that stays wet for days points toward root rot. Bone-dry soil with crispy leaves points toward underwatering.
  2. Look at the pattern. Are spots on old leaves or new ones? Are they on the top surface, underside, or stems? A single leaf is different from a whole plant.
  3. Inspect with a hand lens. Mildew is powdery, mold is fuzzy, and spores or ooze may only show up up close.
  4. Check the undersides of leaves and the leaf joints. Pests such as spider mites and scale can mimic disease symptoms.
  5. Unpot the plant if root trouble is suspected. Healthy roots are firm and white or tan. Brown, mushy roots mean rot.
  6. Compare with reference photos. Use a reliable extension service or plant pathology resource to confirm your match.

Quick Reference: Symptoms and First Responses

Disease Main Sign First Response
Powdery mildew White, flour-like patches Improve airflow, remove heavily affected leaves
Root rot Wilting in wet soil, brown mushy roots Unpot, trim rot, repot in fresh, fast-draining mix
Leaf spot (fungal) Round spots with darker borders Remove spotted leaves, water at soil level
Botrytis (gray mold) Fuzzy gray growth on flowers Remove dead blooms, reduce humidity
Anthracnose Sunken dark lesions, brown tips Prune infected tissue, keep foliage dry
Bacterial leaf spot Water-soaked, slimy spots with halo Remove affected leaves, isolate plant
Viral mosaic Mottling, streaks, distorted growth Remove and discard, control insect vectors

Treatment Options and When to Use Them

Start with cultural fixes. Most fungal and bacterial problems improve when you change watering habits, increase light and airflow, and remove infected material. If that is not enough, a labeled fungicide or copper-based product may help for fungal leaf spot and mildew. Read the label, confirm the product is registered for the specific plant, and test on a small area first. Bacterial infections rarely respond to sprays, so sanitation and removal matter most. For any plant you value, a local extension office or a certified plant diagnostic lab can confirm the problem before you commit to a treatment.

When you prune, cut at least an inch into healthy tissue and clean your blades with rubbing alcohol between plants. Dispose of infected debris in the trash rather than the compost. For more general guidance on identifying disease types, the 10 Plant Diseases with Pictures: How to Spot and Treat Them article covers a broader range of cases.

Common Mistakes

  • Treating before diagnosing. Spraying a fungicide on a plant with root rot wastes time while the roots keep dying.
  • Misting leaves. Wet foliage encourages leaf spot and mildew. Mist only if your plant specifically needs humidity, and let leaves dry quickly.
  • Using pots without drainage. Standing water is the top cause of root rot in houseplants.
  • Ignoring the pests that carry disease. Aphids and thrips can spread viruses from plant to plant.
  • Reusing contaminated pots and tools. Scrub pots and disinfect shears before moving on to another plant.

Tips for Preventing House Plant Diseases

  • Water when the top inch or two of soil is dry for most tropical species, and check the drainage hole.
  • Use a well-draining potting mix. Add perlite or pumice for succulents, cacti, and plants prone to rot.
  • Give each plant room to breathe. Space plants so leaves do not touch and place them where a gentle breeze can reach them.
  • Quarantine new plants for two to three weeks before placing them near your collection.
  • Remove dead leaves and spent flowers promptly to reduce fungal starting points.
  • Inspect plants weekly, flipping leaves to check the undersides.

A few supplies make diagnosis and treatment easier. Pick tools that fit the job rather than buying a full kit at once.

  • A clean pair of bypass pruners lets you cut diseased tissue cleanly without crushing stems, which reduces the chance of spreading infection. View on Amazon
  • A hand lens or pocket magnifier helps you see powdery growth, spores, and tiny pest eggs that are hard to spot with the naked eye. View on Amazon
  • A soil moisture meter gives a quick reading of root-zone moisture, which helps you avoid the overwatering that causes most rot. View on Amazon
  • A copper-based fungicide labeled for indoor ornamentals is a reasonable option for fungal leaf spot, provided you follow the label closely. View on Amazon

FAQ

What is the most common house plant disease?

Powdery mildew and root rot are the two most frequently reported problems. Powdery mildew is easy to see on leaves, while root rot is hidden and often only found after the plant starts to wilt.

Can I save a plant with root rot?

Often, yes, if you act early. Unpot the plant, cut away all brown, mushy roots with clean shears, let the remaining roots dry briefly, and repot in fresh, fast-draining soil in a container with drainage holes. Cut back top growth if needed to balance the reduced root system.

Is powdery mildew dangerous to houseplants?

It is rarely fatal on its own, but heavy infections weaken leaves, reduce photosynthesis, and can make plants more vulnerable to other problems. Improving airflow and removing badly affected leaves usually brings it under control.

Do I need a fungicide for every fungal disease?

No. Many fungal problems respond well to cultural changes such as better watering, improved airflow, and removing infected leaves. Use fungicides when cultural fixes are not enough, and always follow the label instructions.

How do I tell disease from pests?

Look for insects, webbing, sticky residue, or droppings on the plant. Pests are visible, even if small. Disease symptoms like spots, mold, and rot are caused by pathogens and usually show up as patterns on the leaf or stem.

Can houseplant diseases spread to humans or pets?

Most houseplant pathogens affect only plants. However, some plants are toxic if eaten, and mold growing on plant material can irritate sensitive people. If you have concerns about health or pets, consult a veterinarian, physician or poison control service.

When should I throw away a sick plant?

Consider discarding a plant if the disease is viral, if root rot has consumed most of the root system, or if bacterial infection has spread through most of the foliage. Remove it from your collection before the problem spreads to other plants.

How often should I check my plants for disease?

A weekly inspection is a good routine. Check the soil moisture, look at the top and underside of leaves, and check the base of the plant and the drainage hole. Early detection makes almost every problem easier to fix.

Conclusion

House plant diseases with names and pictures give you a practical starting point for diagnosis, but the most reliable approach combines close observation, checking the roots and soil, and matching symptoms to a known pattern. Most indoor diseases respond to better watering, improved airflow and prompt removal of infected tissue. Keep your tools clean, quarantine new plants, and inspect your collection regularly, and you will catch most problems while they are still small and easy to manage.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our plant care Q&A guides, checking product details against manufacturer specifications and owner feedback.